Trunk / Liftgate Latch: Service and Repair

Latch Replacement - Rear Compartment Lid

Removal Procedure





1. Remove the rear compartment lid trim.
2. Disconnect the electrical connector from the lid latch assembly.
3. Disconnect the lid latch cable (2) from the lock cylinder.
4. Remove the fastener (3) securing the rear compartment lid interior release handle to the rear compartment lid.
5. Remove the fasteners securing the rear compartment lid latch assembly (1) to the rear compartment lid.
6. Remove the lid latch assembly from the rear compartment lid.


Installation Procedure





1. Install the lid latch assembly (1).

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the fasteners in order to secure the lid latch assembly (1) to the rear compartment lid.

Tighten the fasteners 11 N.m (93 lb in).

3. Install the latch cable (2) to the lock cylinder.
4. Install the fastener (3) in order to secure the rear compartment lid interior release handle to the rear compartment lid.

Tighten the fastener (3) to 2 N.m (18 lb in).

5. Connect the electrical connector to the lid latch assembly.
6. Install the rear compartment lid trim.
Inspect the latch for proper operation before closing compartment lid.