Traction Ready Indicator Inoperative (W/NW9)

Traction Ready Indicator Inoperative (w/NW9):

Traction Ready Indicator Inoperative (w/NW9)

Circuit Description
The Traction Ready indicator is located on the traction control switch and is controlled by the instrument cluster via serial data messages from the EBCM. The indicator is illuminated when the traction control system (TCS) is ready to be activated, if necessary.

When the EBCM disables the TCS, it sends a serial data message to the instrument cluster. The instrument cluster then turns OFF the Traction Ready indicator. Each time the ignition is cycled from OFF to ON, the TCS is enabled.