Child Restraint: Service and Repair

BRACKET REPLACEMENT - CHILD SEAT BELT RESTRAINT SYSTEMS

REMOVAL PROCEDURE

CAUTION: Do NOT attempt to repair or alter the bracket on the child seat restraint system. If the bracket is damaged, replace the entire bracket. Altering the bracket could result in personal injury.

1. Remove the rear seat back.




2. Remove the outer seat belt anchor bolts.
3. Position the lower portion of the rear seat back sound barrier out of the way.




4. Remove the nuts (2) securing the bracket (1) to the vehicle.
5. Remove the bracket (1) from the vehicle in Seats.

INSTALLATION PROCEDURE




1. Position the bracket (1) to the vehicle.
2. Install the nuts (2).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the nuts to 41 N.m (30 lb ft).

3. Reposition the rear seat sound barrier to its original position.




4. Install the outer seat belt anchor bolts.

Tighten
Tighten the bolts to 41 N.m (30 lb ft).

5. Install the rear seat back.