Lateral Accelerometer: Service and Repair

Lateral Accelerometer Replacement (w/JL4)

Removal Procedure
1. Turn OFF the ignition.
2. Remove the rear seat cushion. Refer to Seat Cushion Replacement - Rear in Seats.
3. Disconnect the lateral accelerometer sensor electrical connector (2).
4. Remove the 2 lateral accelerometer sensor screws (3).
5. Remove the lateral accelerometer sensor (1).

Installation Procedure
1. Install the lateral accelerometer sensor (1)

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the 2 lateral accelerometer sensor screws (3).
Tighten
Tighten the 2 lateral accelerometer screws to 2.4 N.m (21 lb in).
3. Connect the lateral accelerometer sensor electrical connector (2).
4. Install the rear seat cushion. Refer to Seat Cushion Replacement - Rear in Seats.
5. Perform the ABS Diagnostic System Check. Refer to Diagnostic System Check - ABS. Diagnostic System Check