Heater Pipe Adapter Replacement - Inlet
HEATER PIPE ADAPTER REPLACEMENT - INLETTOOLS REQUIRED
J 38185 Hose Clamp Pliers
REMOVAL PROCEDURE
1. Drain the cooling system.
2. Remove the heater hose from the heater inlet pipe adapter using the J 38185.
3. Remove the bolt from the heater pipe adapter (1).
4. Remove the heater inlet pipe adapter (1) from the engine.
INSTALLATION PROCEDURE
1. Install the heater inlet pipe adapter (1) to the engine.
2. Install the heater pipe adapter bolt.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the bolt to 10 N.m (89 lb in).
3. Install the heater hose to the heater pipe adapter and reposition the clamp using the J 38185.
4. Fill the cooling system.