License Plate Lamp: Service and Repair
LICENSE LAMP REPLACEMENTREMOVAL PROCEDURE
1. Remove the screws from the license lamp.
2. Remove the license lamp from the rear bumper fascia.
3. Remove the bulb/socket from the license lamp by rotating it counterclockwise.
4. Remove the bulb from the socket, if required.
INSTALLATION PROCEDURE
1. Install the bulb to the socket, if required.
2. Install the bulb/socket to the license lamp.
3. Rotate the bulb/socket clockwise to secure it to the license plate lamp.
4. Install the license lamp to the rear bumper fascia.
5. Install the license lamp screws to the license lamp.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the license lamp screw to 2 N.m (18 lb in).