Cupholder Replacement - Front Floor Console

Cupholder Replacement - Front Floor Console

Removal Procedure




1. Position the parking brake lever to the full upright position.
2. Position the shift lever fully rearward.
3. Remove the instrument panel (I/P) accessory trim plate.
4. Remove the screws from the front floor console cupholder.
5. Remove the cupholder from the console by lifting up and rearward.

Installation Procedure




1. Install the cupholder to the front floor console.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the screws to the front floor console cupholder.

Tighten the screws to 2 N.m (18 lb in).

3. Install the I/P accessory trim plate.
4. Position the shift lever to the PARK position.
5. Release the parking brake lever.