Trim Panel Replacement - Rear Quarter Upper (Sedan)

Trim Panel Replacement - Rear Quarter Upper (Sedan)

Removal Procedure




1. Remove the rear seat bolster, if equipped.
2. Pull out the door weatherstrip, if necessary.
3. Start at the top of the upper quarter trim panel. Pull the trim panel away from the quarter panel to disengage the retaining clips.
4. Remove the remainder of the trim panel from the quarter panel.
5. Route the shoulder belt through the T-slot in the trim panel.

Installation Procedure




1. Route the shoulder belt through the T-slot in the trim panel.
2. Align the trim panel to the quarter panel.
3. Press the trim panel into the quarter panel to engage the retaining clips.
4. Install the door weatherstrips, if necessary.
5. Install the rear seat bolster, if equipped.