Seat Back Center Pivot Replacement - Rear Folding
SEAT BACK CENTER PIVOT REPLACEMENT - REAR FOLDINGREMOVAL PROCEDURE
1. Remove the rear folding seat back.
2. Remove the center pivot bolts from the seat back.
3. Remove the pivot from the floor.
INSTALLATION PROCEDURE
1. Position the seat back center pivot to the rear floor.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the seat back center pivot bolts.
Tighten
Tighten the bolts to 25 N.m (18 lb ft).
3. Install the rear folding seat back.