Console Replacement - Overhead (w/Out Storage)
Console Replacement - Overhead (W/Out Storage)
Removal Procedure
1. Insert a flat-tipped tool at the rear edge of the console (1) and rotate rearward to release the clips.
2. Pull the console down and disconnect the electrical connectors to the sunroof switch (1) and to the garage door transmitter.
3. Remove the overhead console from the vehicle.
Installation Procedure
1. Position the overhead console in the vehicle
2. Connect the electrical connector to the sunroof switch (1) and to the garage door transmitter.
3. Position the front tabs in the sunroof bezel.
4. Press the console up to secure the rear clips.