Cupholder Replacement - Front Floor Console

CUPHOLDER REPLACEMENT - FRONT FLOOR CONSOLE

REMOVAL PROCEDURE
1. Remove the front floor console trim plate.




2. Remove the support springs from the console cup holder.




3. Insert a flat-bladed tool under the hinge pivot point and pull the cupholder forward. Repeat for the opposite side.




4. Remove the cupholder from the console trim plate.




5. Remove the support springs from the cupholder.

INSTALLATION PROCEDURE




1. Install the support springs to the cupholder.




2. Position the cupholder to the console trim plate. Install the cupholder to the trim plate by pressing into place until fully seated into the pivot points.




3. Install the support springs to the console cup holder.
4. Inspect the cupholder for proper installation.
5. Install the front floor console trim plate.