Keyless Entry Receiver: Service and Repair

REMOTE CONTROL DOOR LOCK RECEIVER REPLACEMENT

REMOVAL PROCEDURE
1. Remove the instrument panel (I/P) trim panel.




2. Disengage the retainers to the remote control door lock receiver from the I/P trim pad.
3. Disconnect the electrical connector (1) from the door lock receiver (2).
4. Remove the door lock receiver.

INSTALLATION PROCEDURE




1. Connect the electrical connector (1) to the door lock receiver (2).
2. Install the door lock receiver to the I/P trim pad.
3. Install the I/P trim panel.
4. Program the transmitter to the new receiver. Programming and Relearning