Glove Box Lamp Switch: Service and Repair

INSTRUMENT PANEL (I/P) COMPARTMENT LAMP SWITCH REPLACEMENT

REMOVAL PROCEDURE




1. Remove the instrument panel (IP) compartment.
2. Reach behind the IP compartment support panel and depress the retaining tabs on the IP compartment lamp switch to release.
3. Press the lamp switch through the switch opening toward the rear of the vehicle.
4. Disconnect the electrical connector from the IP compartment lamp switch.

INSTALLATION PROCEDURE




1. Connect the electrical connector to the IP compartment lamp switch.
2. Align the lamp switch to the switch opening in the IP compartment support panel, then press the switch into place to secure the retaining tabs.
3. Install the IP compartment.