Seat Back Replacement - Rear (Stationary)

SEAT BACK REPLACEMENT - REAR (STATIONARY)

REMOVAL PROCEDURE
1. Remove the rear seat cushion.




2. Remove the rear seat back nuts from the child seat latch bracket.




3. Grasp the bottom of the rear seat back and lift upward to disengage offsets on the upper frame bar from the hangers.
4. Remove the rear seat back from the vehicle.

INSTALLATION PROCEDURE
1. Position the rear seat back to the vehicle.




2. Hook the seat back upper frame to the hangers on the rear shelf.




3. Install the rear seat back nuts to the latch bracket.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the rear seat back nuts to 10 N.m (89 lb in).

4. Install the rear seat cushion.