92. Supercharger Installation

Supercharger Installation







1. Install the supercharger gasket.







2. Install the supercharger.

Notice: Refer to Fastener Notice in Service Precautions.
Fastener Notice


3. Install the spacers, bolts, and stud to the supercharger in the proper locations.
- Tighten the stud/bolts to 23 Nm (17 ft. lbs.).







4. Install the throttle body and gasket.
5. Install the throttle body nuts.
- Tighten the throttle body nuts to 10 Nm (89 inch lbs.).







6. Install the engine wiring harness heat shield.
7. Install the engine wiring harness heat shield bolt and nut.
- Tighten the engine wiring harness heat shield bolt and nut to 10 Nm (89 inch lbs.).







8. Install the MAP sensor bracket.
9. Install the MAP sensor bracket bolts.
- Tighten the MAP sensor bracket bolts to 30 Nm (22 ft. lbs.).

10. Install the vacuum block.
11. Install the vacuum block bolts.
- Tighten the vacuum block bolts to 10 Nm (89 inch lbs.).

12. Install the boost solenoid.
13. Install the boost solenoid bolts.
- Tighten the boost solenoid bolts to 26 Nm (19 ft. lbs.).

14. Install the regulator valve and harness bolt.







15. Install the booster bypass.
16. Install the booster bypass nut.
- Tighten the booster bypass nut to 10 Nm (89 inch lbs.).







17. Install the fuel rail.
18. Install the fuel rail nuts and stud.
- Tighten the fuel rail nuts and stud to 10 Nm (89 inch lbs.).

19. Install the vacuum line to the fuel rail.
20. Install the spark plug wires.