Door Locking Rod/Bellcrank Replacement - Rear
DOOR LOCKING ROD/BELLCRANK REPLACEMENT - REARREMOVAL PROCEDURE
1. Remove the rear door trim panel.
2. Remove the rear door water deflector.
3. Remove the rear inner energy absorber pad.
4. Disconnect the inside locking rod (2) and handle rod (3) from the inside door handle.
5. Remove the retainer clips from the rods.
6. Remove the rear door lock.
7. Remove the locking rod from the rear door lock.
INSTALLATION PROCEDURE
1. Install the locking rod to the rear door lock. Push in to secure.
2. Install the rear door lock.
3. Install the inside handle rod (3) and lock rod (2) to the rear door inside door handle.
4. Install the retainer clips to the rods.
5. Install the rear inner energy absorber pad.
6. Install the rear door water deflector.
7. Install the rear door trim panel.