Compressor Clutch Does Not Engage

TEST DESCRIPTION

Steps 1-2:

Steps 3-4:

Steps 5-8:

Steps 9-11:

Steps 12-16:

Steps 17-22:

Steps 23-28:

Steps 29-34:

Steps 35-37:

The numbers below refer to the step numbers on the diagnostic table.
2. The A/C compressor relay output is disabled if engine coolant temperature is above 124°C (255°F) for the LG8 and 121°C (250°F) for the L36.
6. The HVAC control module is inoperative when the module does not respond to any operator control requests to enable the A/C compressor. The blower motor may still operate independent of the A/C controls.