Steering Column Filler Replacement

Steering Column Filler Replacement

Removal Procedure

1. Remove the left instrument panel (IP) insulator. Refer to Closeout/Insulator Panel Replacement - Left (Service and Repair) .




2. Remove the bolts from the bottom of the steering column filler.
3. Pull the steering column filler rearward and upward in order to unsnap the filler from the IP.
4. Remove the connector from the low tire reset switch, if equipped.



Installation Procedure

1. Install the electrical connection to the low tire reset switch, if equipped.




2. Align the steering column filler locating pins and the retaining clips with slots in the instrument panel.
3. Press down on the steering column filler in order to lock in the retainers.

Notice: Refer to Fastener Notice in Cautions and Notices.

4. Install the steering column filler bolts.

Tighten the bolts to 2 N.m (18 lb in).

5. Install the left IP insulator. Refer to Closeout/Insulator Panel Replacement - Left (Service and Repair) .