39. Drive Sprocket Support Assemble

Drive Sprocket Support Assemble

^ Tools Required
- J 8092 Driver Handle
- J 28677 Drive Sprocket Support Bearing Installer
- J 36850 TRANSJEL Lubricant





1. Assemble J 28677 and J 8092.
2. Lubricate drive sprocket support bearing (521) with J 36850.

Important: When installing the new bearing the part number should be visible (facing upward).

3. Using the assembled tool, press in the drive sprocket bearing assembly (521).





4. Install the drive sprocket support assembly (522).

Notice: Refer to Fastener Notice in Service Precautions.

5. Install the 4 drive sprocket support bolts (524).
^ Tighten the bolts to 25 Nm (18 ft. lbs.).