Instrument Panel (IP) - Outer Trim Cover Replacement

Instrument Panel (I/P) Outer Trim Cover Replacement (Pontiac)

Removal Procedure




1. Remove the screw (2) from the outer trim cover (1).
2. Remove the outer trim cover (1) from the instrument panel (I/P) carrier.

Installation Procedure




1. Position the outer trim cover (1) to the I/P carrier.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the screw (2) to the outer trim cover (1).

Tighten the screw to 2 N.m (18 lb in).