Seat Back Cover Replacement - Front Without RPO Code AJ7
SEAT BACK COVER REPLACEMENT - FRONT WITHOUT RPO CODE AJ7REMOVAL PROCEDURE
1. Remove the front bucket seat back.
2. Remove the front seat head restraint.
3. Disconnect the J-hook retainer (1).
4. Remove the release lever knob (5) from the recliner (8), if equipped.
5. Pull the bottom of the seat back cover assembly (2) up and over the frame (11).
INSTALLATION PROCEDURE
1. Pull the bottom of the seat back cover assembly (2) down and over the frame (11).
2. Connect the J-hook retainer (1).
3. Install the release lever knob (5) to the recliner (8), if equipped.
4. Install the head restraint.
5. Install the front bucket seat back.
6. Reposition the front seat back to the original position.