Seat Back Frame Replacement - Front (With AJ7)

Seat Back Frame Replacement - Front (With AJ7)

Removal Procedure




1. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 7, or SIR Disabling and Enabling Zone 9 in Restraint Systems.
2. Remove the front bucket seat.
3. Remove the seat back cover and pad.
4. Remove the head restraint guides (6) from the seat back frame (7).
5. Unfasten the wire harness for the inflatable restraint module.
6. Remove the recliner bolts (9).
7. Remove the pivot bolt (13).
8. Remove the seat back frame (7) from the recliner (11).

Installation Procedure




1. Install the seat back frame (7) to the recliner (11).

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the recliner bolts (9).

Tighten the bolts to 20 N.m (15 lb ft).

3. Install the pivot bolt (13).

Tighten the bolts to 20 N.m (15 lb ft).

4. Fasten the wire harness for the inflatable restraint module.
5. Install the head restraint guides (6) from the seat back frame (7).
6. Install the seat back cover and pad.
7. Install the front bucket seat.
8. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 7, or SIR Disabling and Enabling Zone 9 in Restraint Systems.