Brake Rotor/Disc: Specifications

DISC BRAKE COMPONENT SPECIFICATIONS

Brake Rotor Diameter 10.197 in (259.0 mm)

Brake Rotor Discard Thickness* 0.736 in (18.70 mm)

Brake Rotor Maximum Allowable Assembled Lateral Runout 0.002 in (0.06 mm)

Brake Rotor Maximum Allowable Scoring 0.059 in (1.50 mm)

Brake Rotor Maximum Allowable Thickness Variation 0.001 in (0.025 mm)

Brake Rotor Minimum Allowable Thickness after Refinish 0.739 in (18.776 mm)

Brake Rotor Thickness - New** 0.806 in - 0.796 in (20.48 mm - 20.22 mm)

* All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor, replace any rotor that does not meet the minimum thickness specification.

** New rotors could range to 0.786 in (19.96 mm) due to thickness tolerances.