Instrument Panel (IP) - Trim Panel Replacement - Right

Instrument Panel (I/P) Trim Panel Replacement - Right

Removal Procedure




1. Open the instrument panel (I/P) compartment door to access the right I/P trim panel (3).
2. Remove the I/P accessory trim plate.
3. Remove the screws (1) from the RH I/P trim panel (3).
4. Remove the right I/P trim panel (3) from the I/P (2).

Installation Procedure




1. Position the right I/P trim panel (3) to the I/P (2).

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the right I/P trim screws (1).

Tighten the screws to 2.3 N.m (20 lb in).

3. Install the I/P accessory trim plate.
4. Close the I/P compartment door.