Air Cleaner Fresh Air Duct/Hose: Service and Repair
AIR CLEANER INTAKE DUCT REPLACEMENTREMOVAL PROCEDURE
1. Remove the outlet splash shield from the air cleaner.
2. Remove the left headlamp assembly.
3. Remove the upper push-in retainer (1) from the front air cleaner intake duct.
4. Remove the left front tire and wheel.
5. Remove the left front wheel house panel.
6. Remove the lower push-in retainer (4) from the front air cleaner intake duct.
7. Remove the front air cleaner intake duct (3) through the headlamp assembly opening.
8. Remove the resonator rear push-in retainer and the upper attaching bolt (5).
9. Remove the resonator assembly through the wheel house opening.
INSTALLATION PROCEDURE
1. Install the resonator assembly through the wheel house opening.
2. Install the resonator rear push-in retainer and the upper attaching bolt (5).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the bolt to 7 N.m (61 lb in).
3. Install the front air cleaner intake duct (3) through the headlamp assembly opening.
4. Install the lower push-in retainer (4) to the front air cleaner intake duct.
5. Install the left front wheel house panel.
6. Install the left front tire and wheel.
7. Lower the vehicle.
8. Install the upper push-in retainer (1) to the front air cleaner intake duct.
9. Install the headlamp assembly.
10. Install the air cleaner outlet splash shield.