Steering Column Trim Covers
STEERING COLUMN TRIM COVERS REPLACEMENTREMOVAL PROCEDURE
1. Remove the tilt lever, if applicable.
2. Remove the retaining screws (4) from the lower column trim cover (3).
3. Remove the upper column trim cover (1) by tilting up and unsnapping from the lower column trim cover hinges (3).
4. Remove the lower column trim cover (3) from the steering column (6).
INSTALLATION PROCEDURE
1. Install the lower column trim cover (3) to the steering column.
2. Install the upper column trim cover (1) to the steering column (6).
3. Install the retaining screws (4) to the lower steering column trim cover (3).
NOTE: Refer to Fastener Notice in Service Precautions.
Fastener Notice
Tighten
Tighten the screws to 4 N.m (36 lb in).
4. Install the tilt lever, if applicable.