Seat Replacement - Rear

Seat Replacement - Rear

Removal Procedure

1. Fold down seat back.




2. Remove the plastic hinge covers (1).
3. Remove seat back hinge bolts (2).
4. Remove center seat belt retractor, if necessary. Refer to Seat Belt Retractor Replacement - Center Rear .
5. Remove the lower bolts (3) from the seat.
6. Remove the rear seat (4) from the vehicle.



Installation Procedure

1. Place the rear seat to the anchors.

Notice: Refer to Fastener Notice in Cautions and Notices.





2. Install the lower seat bolts (3).

Tighten the lower seat bolts (3) to 18 N.m (13 lb ft).

3. Install center seat belt retractor, if removed. Refer to Seat Belt Retractor Replacement - Center Rear .
4. Install the seat back hinge bolts (2).

Tighten the seat back hinge bolts (2) to 18 N.m (13 lb ft).

5. Install the plastic hinge covers (1).
6. Install the rear seat to its original position.