Splash Shield Replacement - Engine - Left

Splash Shield Replacement - Engine - Left

Removal Procedure





1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
2. Remove the following components from the vehicle:

* The 2 bolts (3)
* The 4 retainers (2)
* The engine splash shield (1)




Installation Procedure






Notice: Refer to Fastener Notice in Cautions and Notices.

1. Install the engine splash shield (1) to the vehicle. Secure the splash shield with the 2 bolts (3) and the 4 retainers (2).

Tighten the engine splash shield bolts to 10 N.m (89 lb in).

2. Lower the vehicle.