Park Brake Hardware Replacement (Disc)

Park Brake Hardware Replacement (Disc Brakes)

Removal Procedure
1. Remove the rear disc (12). Refer to Brake Rotor Replacement - Rear in Disc Brakes. Brake Rotor Replacement - Front
2. Remove the park brake, hardware (4,5,6,7,10,11,14,15) with the park brake shoes. Refer to Park Brake Shoe Replacement. Service and Repair

Installation Procedure
1. Apply Lubriplate Lubricant, GM P/N 1050109, Canadian P/N 5264008, or the equivalent, to the metal contact points on the following components:
^ The backing plate (1)
^ The park brake shoe lever (2)
^ The adjuster strut (3)
^ The adjuster (4,5,6)
2. Assemble the adjuster.
3. Install the park brake hardware (4,5,6,7,10,11,14,15) with the park brake shoes. Refer to Park Brake Shoe Replacement.
4. Install the rear disc (12). Refer to Brake Rotor Replacement - Rear in Disc Brakes. Brake Rotor Replacement - Rear