61. Intake Manifold Installation
Intake Manifold Installation1. Install the intake manifold and new gasket.
2. Install the 2 bolts to the alternator bracket.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the intake manifold bolts and nuts.
^ Tighten the upper intake manifold nuts and the bolts to 34 Nm (25 ft. lbs.).
^ Tighten the lower intake manifold bolt to 46 Nm (34 ft. lbs.).
4. Install 2 bolts and 1 nut to the intake manifold support bracket.
^ Tighten the intake manifold support bracket bolts to 24 Nm (18 ft. lbs.).
5. Install the oil dipstick guide bolt.
^ Tighten the oil dipstick guide bolt to 24 Nm (18 ft. lbs.).
6. Connect the brake booster vacuum hose.
7. Connect the EVAP hose for the ORVR.