Door Jamb Switch Replacement - Front
DOOR JAMB SWITCH REPLACEMENT - FRONTREMOVAL PROCEDURE
1. Remove the one mounting bolt and pull the switch (1) from the door jamb.
2. Disconnect the front door jamb switch electrical connector.
3. Remove the door jamb switch (1) from the vehicle.
INSTALLATION PROCEDURE
1. Connect the front door jamb switch electrical connector.
2. Install the switch (1) to the door jamb. Secure the switch with the mounting bolt.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the front door jamb switch mounting bolt to 10 N.m (89 lb in).