Air Flow Meter/Sensor: Service and Repair

REMOVAL PROCEDURE




1. Disconnect the electrical connector (1) from the mass air flow (MAF) sensor (4).
2. Remove the two fasteners.
3. Remove the MAF sensor (4) from the air cleaner housing (2).
4. Remove the O-ring (3).

INSTALLATION PROCEDURE




1. Install a new O-ring (3) on the MAF sensor.
2. Install the MAF sensor (4) into the air cleaner housing (2).
3. Secure the MAF sensor to the air cleaner housing with the 2 fasteners.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the 2 fasteners to 2 N.m (18 lb in).

4. Connect the MAF sensor electrical connector (1).