Acceleration/Deceleration Sensor: Service and Repair

Deceleration Sensor Replacement

Removal Procedure
1. Remove the LH front seat. Refer to Seat Replacement - Front Bucket in Seats.
2. Remove the bolt (1) and the upper deceleration sensor bracket (2).
3. Disconnect the deceleration sensor electrical connector.
4. Remove the two bolts (1) that retain the deceleration sensor (2).
5. Remove the deceleration sensor (2) from the vehicle.

Installation Procedure
1. Install the deceleration sensor (2) to the vehicle.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the two bolts (1) that retain the deceleration sensor.
Tighten
Tighten the two deceleration sensor bolts to 21 N.m (15 lb ft).
3. Connect the deceleration sensor electrical connector.
4. Install the upper deceleration sensor bracket (2) and the bolt (1).
Tighten
Tighten the upper deceleration sensor bolt to 21 N.m (15 lb ft).
5. Install the LH front seat. Refer to Seat Replacement - Front Bucket in Seats.