Ignition Lock Cylinder

Ignition Lock Cylinder Replacement

Removal Procedure
1. Disable the SIR system.
2. Remove the trim covers from the steering column.







3. Insert the key into the ignition lock cylinder (2).
4. Turn the key to the ACC position.
5. Use a screwdriver in order to push in the stop pin on the underside of the lock cylinder case (6).
6. Remove the cylinder from the case.



Installation Procedure







1. Insert the key into the ignition lock cylinder (2).
2. Verity the key is in the ACC position.
3. Install the cylinder into the ignition lock cylinder case (6).
4. Verify the stop pin engages the case.
5. Remove the key from the cylinder.
6. Install the trim covers to the steering column.
7. Enable the SIR system.