Visual/Physical Inspection

Visual/Physical Inspection
1. Inspect for aftermarket devices which could affect the operation of the suspension system.
2. Inspect the easily accessible or visible suspension components for obvious damage or conditions which could cause the symptom.
3. Verify the tires are the proper size. Refer to the tire placard in the IP compartment. If the tires are not the proper size, replace the tires.
4. Measure the tire pressure. Adjust the tire pressure if necessary. Refer to the tire placard in the IP compartment.

Intermittent Conditions
Faulty electrical connections or wiring may be the cause of intermittent conditions.
Diagnostic Aids