Cowl Moulding / Trim: Service and Repair

Air Inlet Grille Panel Replacement

Removal Procedure





1. Remove the windshield wiper arms. Refer to Wiper Arm Replacement in Wipers/Washer System.
2. Remove the following components from the vehicle:

* The 2 plastic retainers (1)
* The air inlet grille panels (2)

3. Remove the rear hood seal from the air inlet grille panel, if necessary. Refer to Seal Replacement - Hood Rear (Service and Repair) .



Installation Procedure





1. Install the rear hood seal to the air inlet grille panel, if removed. Refer to Seal Replacement - Hood Rear (Service and Repair) .
2. Install the air inlet grille panels (2) to the vehicle.
3. Install the 2 plastic retainers (1).
4. Install the windshield wiper arms. Refer to Wiper Arm Replacement in Wipers/Washer System.