Lock Replacement - Front Door

Lock Replacement - Front Door

Removal Procedure





1. Remove the front door inside handle. Refer to Door Handle Replacement - Front Inside (Service and Repair) .
2. Disconnect the power door lock actuator electrical connector (3), if equipped.
3. Remove the following components from the door (1):

* The 3 screws (4)
* The door lock (5) with the cables (2) attached.




Installation Procedure





1. Install the door lock (5) to the door (1).

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Secure the door lock with the 3 screws (4).

Tighten the screws to 5 N.m (43 lb in).

3. Connect the power door lock actuator electrical connector (3), if equipped.
4. Install the front door inside handle. Refer to Door Handle Replacement - Front Inside (Service and Repair) .