Seat Cushion Replacement - Rear

Seat Cushion Replacement - Rear

Removal Procedure





1. Remove the rear seat back trim panel. Refer to Trim Panel Replacement - Rear Seat Back (Left) (Trim Panel Replacement - Rear Seat Back (Left))Trim Panel Replacement - Rear Seat Back (Right) (Trim Panel Replacement - Rear Seat Back (Right)) .
2. Remove the 2 pivot bolts (2).
3. Remove the 2 lower mounting bolts (4).
4. Pull the rear seat cushion forward in order to remove the cushion from the vehicle.



Installation Procedure





1. Slide the rear seat cushion into position. Ensure that the seat belt buckles are properly position through the cushion.
Notice: Refer to Fastener Notice in Cautions and Notices.


2. Install the 2 lower mounting bolts (4)

Tighten the lower mounting bolts (4) to (41 N.m (30 lb ft).

3. Install the 2 pivot bolts (2).

Tighten the pivot bolts (2) to (18 N.m (13 lb ft).

4. Install the rear seat back trim panel. Refer to Trim Panel Replacement - Rear Seat Back (Left) (Trim Panel Replacement - Rear Seat Back (Left))Trim Panel Replacement - Rear Seat Back (Right) (Trim Panel Replacement - Rear Seat Back (Right)) .