Operation CHARM: Car repair manuals for everyone.

Timing Chain Tensioner: Service and Repair

Timing Chain Tensioner Replacement
Removal Procedure

Caution: Refer to Battery Disconnect Caution in Service Precautions.

1. Disconnect the negative battery cable.
2. Remove the engine cover.





3. Remove the ignition coils (1, 2, 3, 4).





4. Remove the spark plugs.





5. Rotate the engine to top dead center on the number one cylinder.





6. Remove the 2 timing chain tensioner bolts (1, 2).
7. Remove the timing chain tensioner.

Installation Procedure
1. Release the ratchet pawl.





2. Fully depress the plunger (4). Apply the hook (2) to the pin (3).

Notice: Refer to Fastener Notice in Service Precautions.





3. Install the timing chain tensioner into the timing chain cover. Secure the timing chain tensioner using 2 bolts (1).
^ Tighten the timing chain tensioner bolts to 9 Nm (80 lb in).
4. Rotate the engine approximately 1 revolution in order to release the plunger on the timing chain tensioner.





5. Install the spark plugs.
^ Tighten the spark plugs to 28 Nm (21 lb ft).





6. Install the ignition coils (1, 2, 3, 4).
7. Install the engine cover.
8. Connect the negative battery cable.
^ Tighten the battery cable bolt to 15 Nm (11 lb ft).