Fuel Pressure Gage Installation and Removal
FUEL PRESSURE GAGE INSTALLATION AND REMOVALTOOLS REQUIRED:
- J 34730-1A Fuel Pressure Gage
- J 42982 Fuel Pressure Gage Adapter
- J 43178 Fuel Line Disconnect Tool
INSTALLATION PROCEDURE
1. Relieve the fuel pressure. Refer to Fuel Pressure Relief Procedure.
2. Remove the four fasteners from the engine cover (1).
3. Remove the engine cover (1) from the engine.
4. Remove the quick connect coupling cover of the fuel feed hose.
5. Using the J 43178 , disconnect the quick connect coupling of the fuel feed hose from the fuel feed pipe of the fuel rail. Use a shop towel in order to catch any remaining fuel that may leak. Refer to Quick Connect Fitting(s) Service (Metal Collar).
6. Install the J 42982 between the fuel feed pipe of the fuel rail and of the fuel feed hose.
7. Install the J 34730-1A to the J 42982 , and tighten securely.
8. Connect the negative battery cable.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the retainer for the negative battery cable terminal to 15 N.m (11 lb ft).
9. Turn ON the ignition in order to pressurize the fuel system.
10. Turn OFF the ignition.
11. Check for any fuel leaks.
REMOVAL PROCEDURE
1. Relieve the fuel pressure. Refer to the Fuel Pressure Relief Procedure.
2. Remove the J 34730-1A from the J 42982.
3. Using the J 43178 , disconnect the quick connect coupling of the J 42982 from the fuel feed pipe of the fuel rail. Use a shop towel in order to catch any remaining fuel that may leak.
4. Disconnect the quick connect coupling of the fuel feed hose from the J 42982 , and remove the adapter. Use a shop towel in order to catch any remaining fuel that may leak.
5. Connect the quick-connect fitting of the fuel feed hose (1) to the fuel feed pipe (2) of the fuel rail.
6. Install the cover for the quick connect coupling of the fuel feed hose.
7. Connect the negative battery cable.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the retainer for the negative battery cable terminal to 15 N.m (11 lb ft).
8. Turn ON the ignition in order to pressurize the fuel system.
9. Turn OFF the ignition.
10. Check for any fuel leaks.
11. Install the engine cover (1) to the engine.
12. Secure the engine cover (1) with the four fasteners.
Tighten
Tighten the fasteners to 7 N.m (62 lb in).