Body - Wheel House Opening Molding Rough/Chipped
Bulletin No.: 02-08-111-005BDate: April 07, 2004
TECHNICAL
Subject:
Wheel House Opening Molding Rough, Discolored or Stone-Chipped (Replace Molding)
Models:
2003 Pontiac Vibe
without RPO B57 (Monotone Appearance Package)
Supercede:
This bulletin is being revised to update the Parts and Warranty Information. Please discard Corporate Bulletin Number 02-08-111-005A (Section 08 - Body & Accessories).
Condition
Some customers may comment that the rear wheel house opening molding or the rear door lower molding is rough, discolored or stone-chipped by road debris.
Cause
Road debris contacting the molding may discolor, chip or roughen the appearance of the molding.
Correction
Replace the moldings and clips with newly designed moldings that will deflect road debris away from the effected area.
For SI molding replacement procedures, refer to the table.
Parts Information
Parts are currently available from GMSPO.
Warranty Information
For vehicles repaired under warranty, use the table shown.
Disclaimer