Front Seat Adjuster Replacement

Front Seat Adjuster Replacement

Removal Procedure

Caution: Refer to SIR Caution in Service Precautions.

1. Remove the front seat.
2. Remove the front seat cushion.
3. Remove the seat adjuster track covers.
4. Remove the seat back frame.
5. Remove the seat back recliners.

Installation Procedure




1. Transfer all remaining seat components to the new adjuster assembly.

* The seat adjuster motors (1, 3, 5)-Refer to Seat Adjuster Motor Replacement.
* The adjuster cables/sensors (2, 4)-Refer to Power Seat Drive Cable Replacement.
* The wiring
* The clips

2. Install the seat back recliners.
3. Install the seat back frame.
4. Install the front seat cushion.
5. Install the front seat.
6. If the vehicle is equipped with memory seats, calibrate the seat. Refer to Memory Seat Calibration.