Rear Seat Armrest Replacement

Rear Seat Armrest Replacement

Removal Procedure

1. Remove the rear seat cushion.
2. Remove the rear seat back.
3. Place the seat back facing downward on a clean protected surface.




4. Remove the fasteners (2) securing the rear seat armrest assembly (1) to the rear seat back (3).
5. Remove the rear seat armrest assembly (1) from the rear seat back (3).

Installation Procedure




1. Install the rear seat armrest assembly (1) into the opening in the rear seat back (3).

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the fasteners (2) in order to secure the rear seat armrest assembly (1) to the rear seat back (3).

Tighten the fasteners (2) to 11 N.m (97 lb in).

3. Install the rear seat back.
4. Install the rear seat cushion.