Dash Integration Module Replacement
DASH INTEGRATION MODULE REPLACEMENTREMOVAL PROCEDURE
1. Before replacement, record the personalization settings to transfer to the new module (if they are available). Refer to Body Control Module (BCM) Programming/RPO Configuration (IPM) Body Control Module (BCM) Programming/RPO Configuration (DIM)Body Control Module (BCM) Programming/RPO Configuration (RIM).
2. Remove the right sound insulator.
3. Remove the Dash Integration Module (DIM) from the bracket by releasing the tab behind the module.
4. Disconnect the electrical connectors (1).
INSTALLATION PROCEDURE
1. Connect the electrical connectors (1) to the DIM (2).
2. Install the DIM into the bracket.
3. Reprogram the DIM. Refer to Body Control Module (BCM) Programming/RPO Configuration (IPM)Body Control Module (BCM) Programming/RPO Configuration (DIM)Body Control Module (BCM) Programming/RPO Configuration (RIM). Programming and Relearning
4. Install the right sound insulator.