Instrument Panel (IP) - Outer Bracket Replacement

Instrument Panel Outer Bracket Replacement

Removal Procedure

Caution: Refer to SIR Caution in Service Precautions.

1. Disable the SIR system. Refer to SIR Disabling and Enabling and to SIR Disabling and Enabling in Restraint Systems.
2. Remove the instrument panel (I/P) carrier.
3. Remove the parking brake pedal assembly.




4. Remove the fasteners from the left I/P end bracket to the hinge pillar.
5. Remove the left I/P end bracket.




6. Remove the fasteners from the right I/P end bracket to the hinge pillar.
7. Remove the left I/P end bracket.

Installation Procedure




1. Install the left I/P end bracket to the hinge pillar.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the fasteners to the left I/P end bracket.

Tighten the fasteners to 50 N.m (37 lb in).




3. Install the right I/P end bracket to the hinge pillar.
4. Install the fasteners to the right I/P end bracket.

Tighten the fasteners to 50 N.m (35 lb in).

5. Install the parking brake pedal assembly.
6. Install the I/P carrier.
7. Enable the SIR system. Refer to SIR Disabling and Enabling and to SIR Disabling and Enabling in Restraint Systems.