Front Seat Cushion Cover and Pad Replacement

Front Seat Cushion Cover and Pad Replacement

Removal Procedure

Caution: Refer to SIR Caution in Service Precautions.

1. Disable the SIR system. Refer to SIR Disabling and Enabling or to SIR Disabling and Enabling in Restraint Systems.
2. Remove the seat cushion.




3. Disconnect the seat cushion cover J channels from the seat cushion frame.
4. Remove the lumbar support knob, if equipped.
5. Remove the power seat switch.
6. Remove the seat cushion cover (1).
7. Remove the seat cushion pad (2).

Installation Procedure




1. Install the seat cushion pad (2) to the seat cushion frame (3).
2. Install the seat cushion cover (1) over the seat cushion pad (2).
3. Install the power seat switch.
4. Install the lumbar support knob, if equipped.
5. Install the seat cushion cover J channels to the seat cushion frame.
6. Install the seat cushion to the front bucket seat.
7. Enable the SIR system. Refer to SIR Disabling and Enabling or to SIR Disabling and Enabling in Restraint Systems.