Fog/Driving Lamp: Service and Repair
FOG LAMP REPLACEMENT - FRONTREMOVAL PROCEDURE
1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
2. Remove the air deflector if necessary. (HX only).
3. Remove the nuts mounting the front fog lamp assembly to the front bumper fascia.
4. Reposition the fog lamp forward to access the electrical connector.
5. Disconnect the electrical connector from the front fog lamp assembly.
6. Remove the fog lamp assembly.
INSTALLATION PROCEDURE
1. Connect the electrical connector to the fog lamp assembly.
2. Install the fog lamp to the front bumper fascia.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the front fog lamp mounting nuts.
Tighten
Tighten the front fog lamp mounting nuts to 10 N.m (89 lb in).
4. Install the air deflector if necessary (HX only).
5. Lower the vehicle.