Seat Adjuster

Seat Adjuster Replacement - Front







Removal Procedure
1. Remove the front seat outer trim panel.
2. Remove the front seat.
3. Disconnect the front seat cushion cover flap J-clip (1).







4. Disconnect the passenger presence detector wiring connector (1).
5. Detach the seat belt pretensioner wiring harness (2) from the seat cushion frame.







6. Remove four seat adjuster retaining nuts (1).
7. Remove the seat adjuster.







Installation Procedure
1. Position the seat adjuster to the seat cushion.

Notice: Refer to Fastener Notice in Cautions and Notices.
Fastener Notice

2. Install 4 seat adjuster retaining nuts (1).


Tighten the seat adjuster retaining nuts to 27.5 N.m (20 lb ft).







3. Attach the seat belt pretensioner wiring harness (2) to the seat cushion frame.
4. Connect the passenger presence detector wiring connector (1).







5. Disconnect the front seat cushion cover flap J-clip (1).
6. Install the front seat.
7. Install the front seat outer trim panel.