Diagnostic System Check
Diagnostic System Check - ABSDiagnostic Aids
- An intermittent Malfunction in the electronic system may be very difficult to detect and to accurately diagnose. The EBCM tests for different malfunctions under different vehicle conditions. For this reason, a thorough test drive is often needed in order to repeat a malfunction. If the system malfunction is not repeated during the test drive. a good description of the complaint may be very useful in locating an intermittent malfunction. Faulty electrical connections or wiring causes most intermittent problems When an intermittent condition is suspected, check the suspect circuits for the following conditions:
- Poor mating of connector halves or backed out terminals
- Improperly formed or damaged terminals
- Wire chafing
- Poor wire to terminal connections
- Dirty or corroded terminals
- Damage to connector bodies
- If the DTC is a history DTC, the problem may be intermittent. Perform the tests shown while moving related wiring and connectors. This can often cause the malfunction to occur. Perform a thorough inspection of all related wiring and connectors pertaining to the history DTC stored. Refer to Testing for Intermittent and Poor Connections Diagnostic Aids.
Test Description
The number(s) in image, refer to the step number(s) on the diagnostic table.
2. Lack of communication may be due to a malfunction of the class 2 serial data circuit.