14. Valve Rocker Arm Cover Removal - Left

Valve Rocker Arm Cover Removal - Left





Important:
^ Do not remove the positive crankcase ventilation (PCV) valve grommet from the cover unless service is required.
^ If the grommet has been removed from the cover, a NEW grommet must be installed.

1. Remove the ignition coil and bracket assembly and bolts.





2. Remove the valve rocker arm cover bolts.
3. Remove the valve rocker arm cover.





4. Remove the gasket (504) from the cover.
5. Discard the gasket. The bolt grommets may be used again, if not damaged.





6. Remove the ignition coils, wire harness, and bolts from the bracket, if required.